A. Slats x 8
B. Bolts x 30
C. Center Support x 1
D. Side Boards x 2
E. End Boards x 2
F. Corner Blocks x 4
G. Long Legs x 2
H. Short Legs x 2
I. Center Support Legs x 2
J. Headboard x 1

Step 1

Attach Short Legs (H) to both ends of one End Board (E).

Attach Long Legs (G) to both ends of the other end board (read step 1-2).

Step 1-2

The two long legs are not identical. When attaching them, ensure the headboard groove faces the back wall, away from the bed frame.

Step 2

Attach Side Board (E) to connect the long and short legs together.

Step 3

Attach both Center Support Legs (I) to the Center Support (C) by screwing them together.

Place the assembled center support piece in the middle of the bed frame.

Adjust the center leg height as needed by rotating the adjustable feet on each of the center legs.

Step 4

Screw in the first two Bolts (B) using the provided allen wrench. Repeat this step for all four corners.

Step 5

Screw in the Corner Blocks (F) with the Bolts (B) using the provided allen wrench. Repeat for all four corners.

Step 6

Screw in the Headboard (J)with the remaining Bolts (B) using the provided allen wrench.

Step 7

Place each of the individual Slats (A) on the bed frame being sure to fit the holes in each end of the slat over the corresponding pins in each of the sideboards. The slats may need to be firmly pushed into place to make contact fully with the side boards.

There’s a small hole on the center support to hold the allen wrench, so you won’t lose it!

Now center your mattress on the slats and you’re done!