A. Slats x 8
B. Bolts x 24
C. Center Support x 1
D. Side Boards x 2
E. End Boards x 2
F. Corner Blocks x 4
G. Corner Legs x 4
H. Center Support Legs x 2

Step 1

Attach Corner Legs (G) to both ends of the Side Boards (D).

Step 2

Lay down the attached parts (from Step 1), roughly an end board length apart.

Step 3

Attach End Board (E) to the corner legs (as assembled in Steps 1 and 2).

Step 4

Repeat Step 3 for the other side board.

Step 5

Attach both Center Support Legs (H) to the Center Support (C) by screwing them together.

Place the assembled center support piece in the middle of the bed frame.

Adjust the center leg height as needed by rotating the adjustable feet on each of the center legs.

Step 6

Screw in the first two Bolts (B) using the provided allen wrench. Repeat this step for all four corners.

Step 7

Screw in the Corner Blocks (F) with the remaining Bolts (B) using the provided allen wrench. Repeat for all four corners.

Step 8

Place each of the individual Slats (A) on the bed frame being sure to fit the holes in each end of the slat over the corresponding pins in each of the sideboards. The slats may need to be firmly pushed into place to make contact fully with the side boards.

Now center your mattress on the slats and you’re done!